St. Paul CPX1409COM Installation Guide download pdf

1. Make sure the base of the vanity is leveled by

laying a level across the top.

2. Set the vanity top on top of the vanity base,

checking the location of the p-trap and drain.

3. Remove the top and install the faucet per

manufacturer’s installation instructions.

4. Hand tighten the pop-up drain with a wrench. Be

careful not to over-tighten the pop-up drain. Over

tightening may cause cracks on the marble top.

5. Apply a thin bead of silicone compound around

the vanity base and set the vanity top carefully in

place. Remove any excess silicone compound with

a wet rag.

6. Attach water lines to faucet and connect the p-trap

and drain.

Page 1

1. Make sure the base of the vanity is leveled by laying a level across the top.2. Set the vanity top on top of the vanity base, checking the

No comments

St. Paul CPX1409COM Installation Guide